Welcome to Scholar Publishing Group

Academic Journal of Environmental Biology, 2022, 3(4); doi: 10.38007/AJEB.2022.030406.

Modified Chitosan Based on Optimized Design in the Treatment of Microbial Leaching Wastewater

Author(s)

Jing Wang

Corresponding Author:
Jing Wang
Affiliation(s)

Department of Neurology Nanxishan Hospital of Guangxi Zhuang Autonomous Region, Guilin, China

Abstract

Currently, microbial leaching wastewater has caused immeasurable damage to the environment, so this wastewater must be properly treated to reduce environmental and biological damage. The purpose of this work is to study the physicochemical properties of chitosan, based on the optimized design of modified chitosan in microbial leaching wastewater treatment, using citric acid (CA) as the cross-linking agent chitosan (CTS) and two modified chitosan Chitosan, Chitosan-Citric Acid (CTS-CA) and Chitosan-Citrate-β-Cyclodextrin (CTS-CA-CD) from β-Cyclodextrin (CD) to Explore Modification Mechanisms. At the same time, the prepared modified chitosan was applied to the adsorption research of dye wastewater and heavy metal wastewater. With the increase of reaction temperature, the adsorption capacity of modified chitosan to Ni2+ also increased. It shows that the temperature is beneficial to the adsorption process. The higher the temperature, the better the adsorption effect of modified chitosan on Ni2+. The effect of initial solution pH on the adsorption process showed that at pH 7, the adsorption capacity of CTS-CA for Ni2+ was 33 mg/g, and the adsorption capacity of CTS-CA-CD for Ni2+ was 37 mg/g.

Keywords

Optimized Design, Modified Chitosan, Microbial Treatment, Leaching Wastewater

Cite This Paper

Jing Wang. Modified Chitosan Based on Optimized Design in the Treatment of Microbial Leaching Wastewater. Academic Journal of Environmental Biology (2022), Vol. 3, Issue 4: 45-54. https://doi.org/10.38007/AJEB.2022.030406.

References

[1] Moon C, Ahn Y, Lee T J, et al. Importance of microbial adaptation for concentrate management in wastewater reuse process:. Energy & Environment, 2019, 30(4):719-731. https://doi.org/10.1177/0958305X18802910

[2] Mian M M, Liu G, Fu B. Conversion of sewage sludge into environmental catalyst and microbial fuel cell electrode material: A review. Science of The Total Environment, 2019, 666(MAY 20):525-539.

[3] Sauperl O, Zemljic L F, Valh J V, et al. Assessment of chemically and enzymatically modified chitosan with eugenol as a coating for viscose functionalization for potential medical use:. Textile Research Journal, 2021, 91(23-24):2813-2832. https://doi.org/10.1177/00405175211021446

[4] Shahraki Z M, Mao X, Waugh S, et al. Potential release of legacy nitrogen from soil surrounding onsite wastewater leaching pools. Water Research, 2020, 169(Feb.1):115241.1-115241.11. https://doi.org/10.1016/j.watres.2019.115241

[5] Mullasseri S, Mishra R, Jadav R M, et al. Uranium Sequestration - Using bacteria. Current Science, 2021, 120(1):13-15.

[6] Masao M, Giuseppe G, Chiharu T. Recovery of Calcium Fluoride from Highly Contaminated Fluoric/Hexafluorosilicic Acid Wastewater. Materials Transactions, 2018, 59(2):290-296.

[7] Maia, Tatinclaux, Kyla, et al. Electricity generation from wastewater using a floating air cathode microbial fuel cell - ScienceDirect. Water-Energy Nexus, 2018, 1(2):97-103.

[8] Zamouche-Zerdazi R, Bouteraa M, Hallel S, et al. Desalination and Water Treatment Impact of clear waters parasites on the biological wastewater treatment. Desalination and Water Treatment, 2021, 213(2021):106–116. https://doi.org/10.5004/dwt.2021.26695

[9] Mahmud S, Manzur T, Samrose S, et al. Significance of properly proportioned fly ash based blended cement for sustainable concrete structures of tannery industry. Structures, 2021, 29(3):1898-1910.

[10] Ali I, Peng C, Khan Z M, et al. Overview of microbes based fabricated biogenic nanoparticles for water and wastewater treatment. Journal of Environmental Management, 2019, 230(JAN.15):128-150. https://doi.org/10.1016/j.jenvman.2018.09.073

[11] Pfluger A, Hahn M, Hering A, et al. Statistical Exposé of a Multiple-Compartment Anaerobic Reactor Treating Domestic Wastewater.. Water environment research : a research publication of the Water Environment Federation, 2018, 90(6):530-542.

[12] Apichaya, Aneksampant, Kazunori, et al. Microbial Leaching of Iron from Hematite: Direct or Indirect Elution. Materials Transactions, 2020, 61(2):396-401.

[13] Almekhlafi M, Iskandar H G, Zain A, et al. An Optimized Design of Antenna Arrays for the Smart Antenna Systems. Computers, Materials and Continua, 2021, 69(1):1979-1994. https://doi.org/10.32604/cmc.2021.018390

[14] Spro O C, Lefranc P, Park S, et al. Optimized Design of Multi-MHz Frequency Isolated Auxiliary Power Supply for Gate Drivers in Medium-Voltage Converters. IEEE Transactions on Power Electronics, 2020, PP(99):1-1.

[15] Seo Y, Kwon K W. Area-optimized design of SOT-MRAM. IEICE Electronics Express, 2020, 17(21):20200314-20200314. https://doi.org/10.1587/elex.17.20200314

[16] Paeng J, Oh J, Moon K, et al. Optimized Design for Precast L-Type Roadway Gutter Using Modified Sulfur Cement Concrete and Wedge Anchors. Journal of the Korean Society for Advanced Composite Structures, 2020, 11(5):28-33. https://doi.org/10.11004/kosacs.2020.11.5.028

[17] Ahmed S, Emadi H, Heinze L, et al. An Experimental Comparison Between Actual Valve and Benchmark Valve Using Modified Design and Optimized Design. International Journal of Engineering Trends and Technology, 2020, 68(2):64-73. https://doi.org/10.14445/22315381/IJETT-V68I2P212

[18] Das N, Ropmay G D, Joseph A M, et al. Modelling the Effective Conductance Drop due to a Particle in a Solid State Nanopore Towards Optimized Design. IEEE Transactions on NanoBioscience, 2020, PP(99):1-1.