With the continuous growth of its high-tech and intelligent industries and the continuous improvement of its population quality, China has become the largest manufacturing country. However, while developing, we should also recognize that the changing situation is a challenge. In the current era of intelligent development, China's MME need to change flexibly according to their own enterprise development situation in order to maintain strong competitiveness, quickly adapt to market demand and accelerate their intelligent development. The main purpose of this paper is to study workshop motion simulation (WMS) based on power mechanical engineering. This paper analyzes the characteristics of mechanical manufacturing (MM) enterprises, analyzes the concept and construction steps of AHP, and studies the optimization strategy of equipment system. Experiments show that MME should focus on analyzing the use of equipment in the factory, improve the utilization rate of equipment within a reasonable range, control equipment failures and maintenance processes, reduce the corresponding failure maintenance time, and make full use of equipment and other resources to achieve the ultimate goal of improving production efficiency.

Essimbi Andrea. Workshop Motion Simulation Based on Power Mechanical Engineering. Kinetic Mechanical Engineering (2021), Vol. 2, Issue 3: 1-10. https://doi.org/10.38007/KME.2021.020301.

[1] Sajjadi M, Pishkenari H N, Vossoughi G. Image acquisition for trolling-mode atomic force microscopy based on dynamical equations of motion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021, 235(18):3654-3677. https://doi.org/10.1177/0954406220977554

[2] Mokhtari M, Taghizadeh M, Ghanbari P G. Fault tolerant control based on backstepping nonsingular terminal integral sliding mode and impedance control for a lower limb exoskeleton. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021, 236(6):2698-2713. https://doi.org/10.1177/09544062211035792

[3] Asadi H, Bellmann T, Mohamed S, et al. Adaptive Washout Filter Based on Fuzzy Logic for a MSP With Consideration of Joints Limitations. IEEE Transactions on Vehicular Technology, 2020, PP(99):1-1.

[4] Kamalapurkar R, Chang D, Rosenfeld J A, et al. Motion tomography via occupation kernels. Journal of Computational Dynamics, 2021, 9(1):27-45. https://doi.org/10.3934/jcd.2021026

[5] Ahmadi B, Ahmadi B, Chegini S N, et al. Multi-objective reliability-based optimal synthesis of path generating four-bar mechanisms: A cooperative game theoretic approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021, 236(5):2298-2311. https://doi.org/10.1177/09544062211028902

[6] Netshimbupfe A F, Abdalla M, Erdem B D, et al. Solid Work simulation as a virtual laboratory concept for supporting student learning of mechanical engineering. New Trends and Issues Proceedings on Humanities and Social Sciences, 2020, 7(3):53-60. https://doi.org/10.18844/prosoc.v7i3.5233

[7] Georgiades F, Hedrih A, Atanasovska I, et al. Investigation on hardness testing of cemented carbide tool based on finite element method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021, 235(20):5057-5069. https://doi.org/10.1177/0954406220976169

[8] Zaidi A, Taallah B, Izemmouren O, et al. Mechanical and durability properties of adobe blocks filled with date palm wastes. World Journal of Engineering, 2021, 19(4):532-545. https://doi.org/10.1108/WJE-02-2021-0094

[9] Ambade S, Tembhurkar C, Pantawane P, et al. Shielded metal arc welding of AISI 409M ferritic stainless steel: study on mechanical, intergranular corrosion properties and microstructure analysis. World Journal of Engineering, 2021, 19(3):266-273. https://doi.org/10.1108/WJE-03-2021-0146

[10] Sharma P, Singh R, Foropon C, et al. The role of big data and predictive analytics in the employee retention: a resource-based view. International Journal of Manpower, 2021, 43(2):411-447. https://doi.org/10.1108/IJM-03-2021-0197

[11] Ishizaka A, Prikshat V, Patel P, et al. A multi-stakeholder ethical framework for AI-augmented HRM. International Journal of Manpower, 2021, 43(1):226-250. https://doi.org/10.1108/IJM-03-2021-0118

[12] Dehghan M, Hooshyarfarzin B, Abbaszadeh M. Proper orthogonal decomposition Pascal polynomial-based method for solving Sobolev equation. International Journal of Numerical Methods for Heat & Fluid Flow, 2021, 32(7):2506-2542. https://doi.org/10.1108/HFF-09-2021-0598

[13] Buragohain M, Das N K D. A neoteric closed loop feedback controller based on correlative-elemental curvature algorithm. Circuit World, 2021, 48(3):341-353. https://doi.org/10.1108/CW-06-2020-0107

[14] Kunju F K F, Naveed N, Anwar M N, et al. Production and maintenance in industries: impact of industry 4.0. Industrial Robot: the international journal of robotics research and application, 2021, 49(3):461-475. https://doi.org/10.1108/IR-09-2021-0211

[15] Ghosh S K, Singh S. Pressure drop and heat transfer characteristics in 60° Chevron plate heat exchanger using Al2O3, GNP and MWCNT nanofluids. International Journal of Numerical Methods for Heat & Fluid Flow, 2021, 32(8):2750-2777. https://doi.org/10.1108/HFF-08-2021-0580

[16] Ebrahimpour Z, Sheikholeslami M, Farshad S A. Heat transfer within linear Fresnel unit using parabolic reflector. International Journal of Numerical Methods for Heat & Fluid Flow, 2021, 32(8):2841-2863. https://doi.org/10.1108/HFF-05-2021-0338

[17] Johansson O, Rlestig H. Democratic governing ideals and the power of intervening spaces as prerequisite for student learning. Journal of Educational Administration, 2021, 60(3):340-353. https://doi.org/10.1108/JEA-04-2021-0079

[18] Chalakqazani M R, Asadi H, Nahavandi S. An Optimal Motion Cueing Algorithm Using the Inverse Kinematic solution of the Hexapod Simulation Platform. IEEE Transactions on Intelligent Vehicles, 2021, PP(99):1-1. https://doi.org/10.1109/TIV.2021.3068286