In modern industrial production, due to the continuous development and progress of construction machinery. In the field of construction engineering, the control of mechanical cooling system has attracted more and more attention. In the current construction machinery industry, it is of great significance to study and practice the cooling technology of the heating system. In order to improve the ability of engineering cooling system control, this paper proposes the method of deep learning and feature clustering to optimize the system. This paper mainly uses the experimental method and the comparative method to study the control method of the heat dissipation system of the construction machinery. The experimental data shows that the temperature in different stages is lower than 80 degrees Celsius, and the change in the later stage is lower than 0.3, so the heat dissipation system can well control the heat generated by the IGBT module.

Sujata Sridevi. Control Method of Complex Environmental Engineering Machinery Cooling System Integrating Deep Learning and Feature Clustering. Kinetic Mechanical Engineering (2021), Vol. 2, Issue 3: 39-46. https://doi.org/10.38007/KME.2021.020305.

[1] Rossella Aversa, Piero Coronica, Cristiano De Nobili, Stefano Cozzini: Deep Learning, Feature Learning, and Clustering Analysis for SEM Image Classification. Data Intell. 2(4): 513-528 (2020). https://doi.org/10.1162/dint_a_00062

[2] Abhishek Jain, Andrea Mario Veggetti, Dennis Crippa, Antonio Benfante, Simone Gerardin, Marta Bagatin: Radiation Tolerant Multi-Bit Flip-Flop System With Embedded Timing Pre-Error Sensing. IEEE J. Solid State Circuits 57(9): 2878-2890 (2021). 

[3] Ly Huu Pham, Bach Hoang Dinh, Thang Trung Nguyen: Optimal power flow for an integrated wind-solar-hydro-thermal power system considering uncertainty of wind speed and solar radiation. Neural Comput. Appl. 34(13): 10655-10689 (2021). 

[4] Shefali Saxena, Arka Datta, Rajarshi P. Chowdhury: Preface to the Special Issue on Signal Processing, Data Acquisition and Front-end Systems for Radiation Detection and Measurements. J. Signal Process. Syst. 94(4): 345-347 (2021). https://doi.org/10.1007/s11265-021-01709-4

[5] Adnan Aktepe, Emre Yanik, Süleyman Ersöz: Demand Forecasting Application with Regression and Artificial Intelligence Methods in a Construction Machinery Company. J. Intell. Manuf. 32(6): 1587-1604 (2021). https://doi.org/10.1007/s10845-021-01737-8

[6] Daisuke Kondo: Projection Screen with Wide-FOV and Motion Parallax Display for Teleoperation of Construction Machinery. J. Robotics Mechatronics 33(3): 604-609 (2021). https://doi.org/10.20965/jrm.2021.p0604

[7] Wafa Zubair Al-Dyani, Farzana Kabir Ahmad, Siti Sakira Kamaruddin: Adaptive Binary Bat and Markov Clustering Algorithms for Optimal Text Feature Selection in News Events Detection Model. IEEE Access 10: 85655-85676 (2021). 

[8] Seongsu Park, Jin-Kyu Gahm:Super-Resolution of 3D Brain MRI With Filter Learning Using Tensor Feature Clustering. IEEE Access 10: 4957-4968 (2021). 

[9] George Rouwhorst, Edgar Mauricio Salazar Duque, Phuong H. Nguyen, Han Slootweg: Improving Clustering-Based Forecasting of Aggregated Distribution Transformer Loadings With Gradient Boosting and Feature Selection. IEEE Access 10: 443-455 (2021). https://doi.org/10.1109/ACCESS.2021.3137870

[10] Mobeen Shahroz, Muhammad Faheem Mushtaq, Rizwan Majeed, Ali Samad, Zaigham Mushtaq, Urooj Akram: Feature Discrimination of News Based on Canopy and KMGC-Search Clustering. IEEE Access 10: 26307-26319 (2021). 

[11] Mujtaba Asad, He Jiang, Jie Yang, Enmei Tu, Aftab Ahmad Malik: Multi-Stream 3D latent feature clustering for abnormality detection in videos. Appl. Intell. 52(1): 1126-1143 (2021). https://doi.org/10.1007/s10489-021-02356-9

[12] Ritu Agarwal, Om Prakash Verma: Robust Copy-Move Forgery Detection Using Modified Superpixel Based FCM Clustering with Emperor Penguin Optimization and Block Feature Matching. Evol. Syst. 13(1): 27-41 (2021). https://doi.org/10.1007/s12530-021-09367-4

[13] Madhulika Yarlagadda, Gangadhara Rao Kancherla, Srikrishna Atluri: Frequent Itemset-Based Feature Selection and Rider Moth Search Algorithm for Document Clustering. J. King Saud Univ. Comput. Inf. Sci. 34(4): 1098-1109 (2021). https://doi.org/10.1016/j.jksuci.2019.09.002

[14] Aleksej Tikhonov, Klaus Müller: Scribe Versus Authorship Attribution and Clustering in Historic Czech Manuscripts: a Case Study With Visual and Linguistic Features. Digit. Scholarsh. Humanit. 37(1): 254-263 (2021). https://doi.org/10.1093/llc/fqaa004

[15] Kenza Belhouchette: Facial Action Units Detection to Identify Interest Emotion: An Application of Deep Learning. Adv. Data Sci. Adapt. Anal. 14(1&2): 2250006:1-2250006:15 (2021). https://doi.org/10.1142/S2424922X22500061

[16] Matthew Avaylon, Robbie Sadre, Zhe Bai, Talita Perciano: Adaptable Deep Learning and Probabilistic Graphical Model System for Semantic Segmentation. Adv. Artif. Intell. Mach. Learn. 2(1): 288-302 (2021). 

[17] Atta-ur-Rahman, Muhammad Umar Nasir, Mohammed Gollapalli, Muhammad Zubair, Muhammad Aamer Saleem, Shahid Mehmood, Muhammad Adnan Khan, Amir Mosavi: Advance Genome Disorder Prediction Model Empowered With Deep Learning. IEEE Access 10: 70317-70328 (2021).

[18] Shanza Abbas, Muhammad Umair Khan, Scott Uk-Jin Lee, Asad Abbas, Ali Kashif Bashir: A Review of NLIDB With Deep Learning: Findings, Challenges and Open Issues. IEEE Access 10: 14927-14945 (2021). 

[19] Saif Hameed Abbood, Haza Nuzly Abdull Hamed, Mohd Shafry Mohd Rahim, Amjad Rehman, Tanzila Saba, Saeed Ali Bahaj: Retinal Image Enhancement Algorithm for Diabetic Retinopathy Diagnostic Using Deep Learning Model. IEEE Access 10: 73079-73086 (2021). 

[20] Abd-Elsalam R. Abd-Elhay, Wael A. Murtada, Mohamed I. Youssef: A Reliable Deep Learning Approach for Time-Varying Faults Identification: Spacecraft Reaction Wheel Case Study. IEEE Access 10: 75495-75512 (2021).