Welcome to Scholar Publishing Group

International Journal of Engineering Technology and Construction, 2020, 1(3); doi: 10.38007/IJETC.2020.010303.

Design and Implementation of Dynamic Time History Analysis in Building Structure CAD

Author(s)

Xia Wang

Corresponding Author:
Xia Wang
Affiliation(s)

Tianjin Chengjian University, Tianjin, China

Abstract

With the continuous development of the construction industry at home and abroad, the dynamic time history analysis has become increasingly important, and the current level of analysis of the dynamic time history is not high enough, and the importance of research cannot be ignored. In order to solve the problem that the dynamic time history analysis of the building structure is not comprehensive and not thorough enough, this paper analyzes the dynamic time history of the building structure CAD and finds that the reinforced concrete frame structure can be more effective than the pure frame structure under the horizontal static load. The lateral displacement is limited; the seismic reinforcement effects of C/GFRP and CFRP fiber materials are compared respectively, and three different schemes are analyzed and compared: reinforcement of the first layer, reinforcement of the first to third layers, and reinforcement of all layers. Under the action of El seismic wave and Taft wave, the maximum interlayer displacement angle of C/GFRP, CFRP strengthened and unreinforced frame structures were used respectively. In this paper, the dynamic time history analysis in the building structure is studied. Based on the motion balance equation of a model under earthquake action, the Newmark-β method is used to analyze the dynamic time history and design in the building structure. The results are applied to the design of building structures to optimize the performance of building structures, and also provide a basis for the development and improvement of seismic design calculation methods for building structures.

Keywords

Building Structure, CAD; Seismic Strengthening, Elastoplasticity, Dynamic Time History Analysis

Cite This Paper

Xia Wang. Design and Implementation of Dynamic Time History Analysis in Building Structure CAD. International Journal of Engineering Technology and Construction (2020), Vol. 1, Issue 3: 28-38. https://doi.org/10.38007/IJETC.2020.010303.

References

[1] Vikram A, Agarwal V, Agarwal A. Lithography technology for advanced devices and introduction to integrated CAD analysis for hotspot detection. IET Circuits, Devices & Systems, 2017, 11(1):1-9. DOI: 10.1049/iet-cds.2015.0325

[2] Yu R, Fang Q, Chen L, et al. Performance-based blast-resistant design of building structure components. Gong Cheng Li Xue/Engineering Mechanics, 2016, 33(11): 75-83.

[3] Brouwer D H, Cadars S, Hotke K, et al. Structure determination of a partially ordered layered silicate material with an NMR crystallography approach. Acta Crystallographica Section C Structural Chemistry, 2017, 73(3): 184-190. DOI: 10.1107/S2053229616019550

[4] Hartmann André, Gotthard M, Robert H, et al. A Workflow for Automatic Quantification of Structure and Dynamic of the German Building Stock Using Official Spatial Data. ISPRS International Journal of Geo-Information, 2016, 5(8):142. DOI: 10.3390/ijgi5080142

[5] Russo D. A Computer Aided Strategy for More Sustainable Products. Ifip Advances in Information & Communication Technology, 2017, 355:149-162.

[6] Wei G, Dong K, Liu Q, et al. Facile preparation of a silica-sphere-poly(catechol hexamethylenediamine) composite for the competitive removal of cadmium(II), lead(II), and copper(II) ions. Journal of Applied Polymer Science, 2018, 135(8): 45839.

[7] Li L, Tang H, Guo S, et al. Design and implementation of an integral design CAD system for plastic profile extrusion die. International Journal of Advanced Manufacturing Technology, 2016, 89(1-4): 1-17. DOI: 10.1007/s00170-016-9099-x

[8] Li Xiaoxu. Discussion on the application of CAD drawing software in four fields of clothing, architecture, machinery and electronics. China Off-campus Education, 2017(25):65+71.

[9] Ren Zhenyu. Application of CAD Technology in Structural Design of High-rise Buildings. Automation & Instrumentation, 2017(10):161-162+165.

[10] Yan Shuaiping, Zhang Yinfang. Analysis of seismic design in structural design of building engineering. Green building materials, 2019(05):81+83.

[11] Yao Xianchun, Yao Wei, Zhang Wei, Yao Jun, Xie Haixiang. Directive Blasting Demolition of High-rise Frame-Shear Structure. Explosive Materials, 2019(03):49-54.

[12] Liu S W, Bai R, Chan S L. Dynamic Time-history Elastic Analysis of Steel Frames Using One Element per Member. Structures, 2016, 8:300-309.

[13] Samuel B, Retheesh R, Ansari MZ, et al. Cross-correlation and time history analysis of laser dynamic specklegram imaging for quality evaluation and assessment of certain seasonal fruits and vegetables. Laser Physics, 2017, 27(10):105601.

[14] Choine M N, Kashani M M, Lowes L N, et al. Nonlinear dynamic analysis and seismic fragility assessment of a corrosion damaged integral bridge. International Journal of Structural Integrity, 2016, 7(2): 227-239.

[15] Tong Z, Hongshuai L, Xiaoming Y, et al. Time history response analysis of landslide mass reinforced by Anchorage pile based on dynamic centrifugal test. Journal of Natural Disasters, 2017, 26(3): 39-47.

[16] Li S, Zuo Z, Zhai C, et al. Comparison of static pushover and dynamic analyses using RC building shaking table experiment. Engineering Structures, 2017, 136:430-440.

[17] Koo R C H, Kwan J S H, Sze E H Y. Stability assessment of soil slopes subject to blasting vibrations based on time history analyses. HKIE Transactions, 2016, 23(3): 130-137.