Welcome to Scholar Publishing Group

International Journal of Engineering Technology and Construction, 2020, 1(1); doi: 10.38007/IJETC.2020.010106.

Metal Matrix Composite Material Based on Wear Resistance in Sandstone Relief Fresco Exterior Wall Construction

Author(s)

Ankite Singha

Corresponding Author:
Ankite Singha
Affiliation(s)

Jawaharlal Nehru University, India

Abstract

With the rapid development of social economy, the types of stone curtain walls have also been increased in the exterior decoration of buildings. Sandstone is a natural stone with strong abrasion resistance and a green decorative material with innovative and modern artistic characteristics. The plasticity and expressiveness of indoor and outdoor are very strong, and the artistic style is very special. This article proposes how to use the wear resistance of metal matrix composites on the basis of relevant theoretical knowledge to play the greatest role in the construction of sandstone relief murals. Experiments in this article show that the trend of using metal matrix composites has been rising by as much as 70% from 2016 to 2019, while the trend of using metal materials has been declining, as low as 13%. It can be seen that metal matrix composite materials are what the public needs. Metal matrix composites have an extremely important position in traditional wear-resistant materials and are widely used. The main reason is that the metal matrix composite material has the characteristics of low production cost, excellent toughness and good deformation hardening ability.

Keywords

Metal Matrix Composites, Wear Resistance of Composites, Sandstone Relief Murals, Mural Exterior Wall Construction

Cite This Paper

Ankite Singha. Metal Matrix Composite Material Based on Wear Resistance in Sandstone Relief Fresco Exterior Wall Construction. International Journal of Engineering Technology and Construction (2020), Vol. 1, Issue 1: 72-85. https://doi.org/10.38007/IJETC.2020.010106.

References

[1] Coutinho M L ,  Veiga J P ,  Alves L C , et al. Characterization of the glaze and in-glaze pigments of the nineteenth-century relief tiles from the Pena National Palace, Sintra, Portugal. Applied Physics A, 2016, 122(7):1-10. https://doi.org/10.1007/s00339-016-0214-5

[2] Jancewicz K ,  Migon P ,  Kasprzak M . Connectivity patterns in contrasting types of tableland sandstone relief revealed by Topographic Wetness Index. Science of the Total Environment, 2019, 656(MAR.15):1046-1062. https://doi.org/10.1016/j.scitotenv.2018.11.467

[3] Zabolotnov A S ,  Brevnov P N , VV Akul’Shin, et al. The Wear Resistance of Composite Materials Based on Ultra-High-Molecular-Weight Polyethylene with Fillers of Various Types. Polymer Science, 2018, 11(3):297-302. https://doi.org/10.1134/S1995421218030243

[4] Inl A ,  Eid A ,  Opc A , et al. Electroerosive wear resistance of metallic composite materials reinforced with superelastic hard carbon particles. Materials Today: Proceedings, 2018, 5(12, Part 3):25944-25947. https://doi.org/10.1016/j.matpr.2018.08.008

[5] Chen P H ,  Zhang Y ,  Li R Q , et al. Influence of carbon-partitioning treatment on the microstructure, mechanical properties and wear resistance of in situ VCp-reinforced Fe-matrix composite. International Journal of Minerals Metallurgy and Materials, 2020, 27(1):100-111. https://doi.org/10.1007/s12613-019-1909-3

[6] Karimbayev T D ,  Afanasiev D V ,  Matyukhin D V , et al. Improvement of fretting wear resistance of blade root made of polymer composite material. VESTNIK of Samara University Aerospace and Mechanical Engineering, 2020, 18(4):64.

[7] Tian S X ,  Tu X H ,  Yang H , et al. Research the Wear Resistance of High Manganese Steel Composite Material Reinforced with Al2O3 Ceramic. Zhuzao/Foundry, 2017, 66(5):476-480.

[8] A S Y ,  A T H ,  B L Y A , et al. Fabrication and Wear Resistance of TiO 2 /Al 2 O 3 Coatings by Micro-arc Oxidation. Rare Metal Materials and Engineering, 2017, 46( 1):23-27. https://doi.org/10.1016/S1875-5372(17)30071-1

[9] Müller, Miroslav, Kejval, et al. Research on wear resistance of poly-componentcomposite materials. Research in Agricultural Engineering, 2017, 63(No. 3):106-114. https://doi.org/10.17221/79/2015-RAE

[10] Kachenyuk M N ,  Somov O V ,  Astashina N B , et al. A study of the wear resistance of a TiC–SiC composite ceramic material prepared by spark plasma sintering. Surface Engineering & Applied Electrochemistry, 2017, 53(5):401-406.

[11] Nosouhian M ,  Monirifard M ,  Gharibpour F , et al. Lingual retainer materials: Comparative evaluation of wear resistance of flowable nanocomposites and universal composite: An in vitro study. Dental Research Journal, 2021, 18(1):69-69.

[12] Lavrinenko V I ,  Kravchenko Y . Porosity and Water Absorbability of Tool Composite Materials as Factors of Improving Wear Resistance of Superabrasive Grinding Wheels. Part 2. Water Freezing in Porous Space of Superabrasive Composites. Journal of Superhard Materials, 2019, 41(3):185-188.

[13] Song C Y ,  Gui Y L ,  Kuang S B , et al. Microstructure and Wear Resistance of a Novel Mo-Ni-Si System Intermetallic Composite with Ductile Mo Phase. MATERIALS TRANSACTIONS, 2016, 57(5):721-725.

[14] Grosse H W . Investigation of three-body wear of dental materials under different chewing cycles. Science and Engineering of Composite Materials, 2018, 25(4):781-787. https://doi.org/10.1515/secm-2016-0385

[15] Alkhudhairy F . Wear Resistance of Bulk-fill Composite Resin Restorative Materials Polymerized under different Curing Intensities. The journal of contemporary dental practice, 2017, 18(1):39-43.

[16] Rajab M A ,  Khodair Z T ,  Laf Ta  A H . Wear Resistance of Composite Materials Reinforced by Glass Fiber. Journal of Engineering and Applied Sciences, 2019, 14(8):10271-10277.

[17] Senbua W ,  Wichitwechkarn J . Molecular identification of fungi colonizing art objects in Thailand and their growth inhibition by local plant extracts. 3 Biotech, 2019, 9(10):1-10. https://doi.org/10.1007/s13205-019-1879-1

[18] K Quédreux. Le chauffage au bois, une énergie responsable. Architecture Interieure Cree, 2018(387):144-149.

[19] Wei N ,  Lv H ,  Wu Y , et al. Selective Activation of Nociceptor TRPV1 Channel and Reversal of Inflammatory Pain in Mice by a Novel Coumarin Derivative Muralatin L from Murraya alata. Journal of Biological Chemistry, 2016, 110(3):285a-285a. https://doi.org/10.1016/j.bpj.2015.11.1543

[20] Anita C ,  Munira M ,  Mural Q , et al. Topical nanocarriers for management of Rheumatoid Arthritis: A review. Biomedicine & Pharmacotherapy, 2021, 141(1):111-180. https://doi.org/10.1016/j.biopha.2021.111880