Welcome to Scholar Publishing Group

International Journal of Engineering Technology and Construction, 2020, 1(2); doi: 10.38007/IJETC.2020.010206.

Micro-Nano Photonics Building Thermal Insulation Material Based on Porous Material-Based Metal Dielectric Film

Author(s)

Anlli Teekarama

Corresponding Author:
Anlli Teekarama
Affiliation(s)

Vrije Universiteit Brussel, Belgium

Abstract

Insulation materials are materials with a guiding thermal coefficient of less than or equal to 0.12. They are widely used in industry and construction. With the help of industry expertise, they can achieve a multiplier effect with half the effort. To a certain extent, the development of materials reflects the level of productivity development of the times, and its quality and output are important indicators to measure the level of scientific, technological and economic development of a country. This article aims to study the application of micro-nano photonics based on porous material-based metal dielectric films in the field of building insulation materials, and analyze the physical properties of dielectric films through related techniques, and conduct quasi-static analysis of the emerging waveguide structures. This paper proposes that glass powder is used as the main raw material, and porous materials are prepared by demagic technology and spray drying technology, and this material is a new choice for building insulation materials. Based on the life cycle of insulation materials and the model of investment cost, it is found that the energy consumption of insulation materials is the largest in the process of putting them into use, and the loss during transportation is the smallest. The experimental results show that when the temperature is between650-660, the bulk density of the porous material decreases from 0.26 to 0.17. As the temperature continues to rise, the bulk density of the porous material reaches 0.15 at the lowest point, and the porosity is close to 94% at the highest temperature. When it is in the range of 650-660, the pressure drops rapidly, from 7.6 to 2.7.

Keywords

Porous Materials, Dielectric Films, Micro-Nano Photonics, Thermal Insulation Materials

Cite This Paper

Anlli Teekarama. Micro-Nano Photonics Building Thermal Insulation Material Based on Porous Material-Based Metal Dielectric Film. International Journal of Engineering Technology and Construction (2020), Vol. 1, Issue 2: 58-75. https://doi.org/10.38007/IJETC.2020.010206.

References

[1] Vanson J M ,  Coudert F X ,  Klotz M , et al. Kinetic Accessibility of Porous Material Adsorption Sites Studied through the Lattice Boltzmann Method. Langmuir the Acs Journal of Surfaces & Colloids, 2018, 33(6):1405-1411. https://doi.org/10.1021/acs.langmuir.6b04472

[2] F  Ebrahimi,  Jafari A ,  Barati M R . Vibration analysis of magneto-electro-elastic heterogeneous porous material plates resting on elastic foundations. Thin-Walled Structures, 2017, 119(oct.):33-46. https://doi.org/10.1016/j.tws.2017.04.002

[3] Soare,  Stefan C . On the overall yielding of an isotropic porous material with a matrix obeying a non-quadratic criterion. International Journal of Engineering Science, 2016, 104(JUL.):5-19. https://doi.org/10.1016/j.ijengsci.2016.04.005

[4] Sadouki M . Experimental characterization of rigid porous material via the first ultrasonic reflected waves at oblique incidence. Applied Acoustics, 2018, 133(APR.):64-72. https://doi.org/10.1016/j.apacoust.2017.12.010

[5] Hao J H ,  Chen Q ,  Kang H . Porosity distribution optimization of insulation materials by the variational method. International Journal of Heat & Mass Transfer, 2016, 92(JAN.):1-7.

[6] Osorio J D ,  Rivera-Alvarez A ,  Girurugwiro P , et al. Integration of transparent insulation materials into solar collector devices. Solar Energy, 2017, 147(MAY):8-21. https://doi.org/10.1016/j.solener.2017.03.011

[7] Juan P, Hidalgo, et al. Experimental Characterisation of the Fire Behaviour of Thermal Insulation Materials for a Performance-Based Design Methodology. Fire Technology, 2016, 53(3):1-32. https://doi.org/10.1007/s10694-016-0625-z

[8] Xu S ,  Chen L ,  Gong M , et al. Characterization and engineering application of a novel ceramic composite insulation material. Composites Part B Engineering, 2017, 111(FEB.):143-147.

[9] Shin S ,  Du H ,  Kim T , et al. Electron doping and stability enhancement of doped graphene using a transparent polar dielectric film. Journal of Materials Science, 2016, 51(2):748-755. https://doi.org/10.1007/s10853-015-9397-y

[10] Xu W ,  Ding Y ,  Yu Y , et al. Highly foldable PANi@CNTs/PU dielectric composites toward thin-film capacitor application. Materials Letters, 2017, 192(APR.1):25-28. https://doi.org/10.1016/j.matlet.2017.01.064

[11] Chen S ,  Zhuo B ,  Guo X . Large Area One-Step Facile Processing of Microstructured Elastomeric Dielectric Film for High Sensitivity and Durable Sensing over Wide Pressure Range. ACS Applied Materials & Interfaces, 2016, 8(31):20364-20370. https://doi.org/10.1021/acsami.6b05177

[12] Jie, Chen, Hengyu, et al. Enhancing Performance of Triboelectric Nanogenerator by Filling High Dielectric Nanoparticles into Sponge PDMS Film.. ACS applied materials & interfaces, 2016, 8(1):736-44. https://doi.org/10.1021/acsami.5b09907

[13] Yasuda Y ,  Ueno S ,  Kadota M , et al. Applicability of locally reacting boundary conditions to porous material layer backed by rigid wall: Wave-based numerical study in non-diffuse sound field with unevenly distributed sound absorbing surfaces. Applied Acoustics, 2016, 113(dec.):45-57.

[14] Mo J ,  Ma W ,  Zhang W , et al. Structure and properties of carbon intercalated halloysite and its organosilicone hybrid film with low dielectric constant. Materials & Design, 2017, 128(aug.):56-63. https://doi.org/10.1016/j.matdes.2017.04.067

[15] Tomozeiu N . Spectroscopic Methods to Investigate Liquid–Porous Material Interactions: An Overview of Optical and Electrical Impedance Techniques. Transport in Porous Media, 2016, 115(3):1-27. https://doi.org/10.1007/s11242-016-0683-1

[16] Song J ,  Han C ,  Lai P T . Comparative Study of Nb2O5, NbLaO, and La2O3 as Gate Dielectric of InGaZnO Thin-Film Transistor. IEEE Transactions on Electron Devices, 2016, 63(5):1-6. https://doi.org/10.1109/TED.2016.2544439

[17] Siddique J ,  Kara A . Capillary Rise of Magnetohydrodynamics Liquid into Deformable Porous Material. Journal of Applied Fluid Mechanics, 2016, 9(6):2837-2843. https://doi.org/10.29252/jafm.09.06.25640

[18] S Glodež, S Dervarič,  Kramberger J , et al. Fatigue crack initiation and propagation in lotus-type porous material. Frattura E Integrita Strutturale, 2016, 10(35):152-160. https://doi.org/10.3221/IGF-ESIS.35.18

[19] Boittin G ,  Vincent P G ,  Moulinec H , et al. Numerical simulations and modeling of the effective plastic flow surface of a biporous material with pressurized intergranular voids. Computer Methods in Applied Mechanics & Engineering, 2017, 323(aug.15):174-201. https://doi.org/10.1016/j.cma.2017.05.004

[20] Lu G ,  Fall M . Modelling blast wave propagation in a subsurfacegeotechnical structure made of an evolutive porous material. Mechanics of materials, 2017, 108(MAY):21-39.

[21] Hmar J ,  Majumder T ,  Mondal S P . Growth and characteristics of PbS/polyvinyl alcohol nanocomposites for flexible high dielectric thin film applications. Thin Solid Films, 2016, 598(JAN.1):243-251. https://doi.org/10.1016/j.tsf.2015.12.032

[22] Wang X ,  Tseng L T ,  Kazazis D , et al. Studying resist performance for contact holes printing using EUV interference lithography. Journal of Micro/Nanolithography, MEMS, and MOEMS, 2019, 18(1):013501.1-013501.11.

[23] Sumislawska M ,  Gyftakis K N ,  Kavanagh D F , et al. The Impact of Thermal Degradation on Properties of Electrical Machine Winding Insulation Material. IEEE Transactions on Industry Applications, 2016, 52(4):2951-2960.

[24] Tiso M ,  Just A . Design criteria for insulation materials applied in timber frame assemblies. Journal of Structural Fire Engineering, 2017, 9(3):252-263.

[25] Hoseini A ,  Malekian A ,  Bahrami M . Deformation and thermal resistance study of aerogel blanket insulation material under uniaxial compression. Energy & Buildings, 2016, 130(oct.):228-237.

[26] Rehman H U . Experimental performance evaluation of solid concrete and dry insulation materials for passive buildings in hot and humid climatic conditions. Applied Energy, 2017, 185(pt.2):1585-1594.

[27] Mahapatra M ,  Karmakar M ,  Dutta A , et al. Microstructural analyses of loaded and/or unloaded semisynthetic porous material for understanding of superadsorption and optimization by response surface methodology. Journal of Environmental Chemical Engineering, 2018, 6(1):289-310. https://doi.org/10.1016/j.jece.2017.11.078

[28] Kram Be Rger J ,  Sraml M ,  Glo De Z S . Computational study of low-cycle fatigue behaviour of lotus-type porous material. International Journal of Fatigue, 2016, 92(pt.2):623-632. https://doi.org/10.1016/j.ijfatigue.2016.02.037

[29] Tao E ,  Ying L ,  Yang S , et al. Nano-montmorillonite-based porous material prepared by gel casting: structure and adsorption properties. Micro & Nano Letters, 2017, 13(3):332-334. https://doi.org/10.1049/mnl.2017.0531

[30] Ghouse S ,  Babu S ,  Van Arkel R J , et al. The influence of laser parameters and scanning strategies on the mechanical properties of a stochastic porous material. Materials & Design, 2017, 131(oct.):498-508. https://doi.org/10.1016/j.matdes.2017.06.041