Welcome to Scholar Publishing Group

International Journal of Engineering Technology and Construction, 2021, 2(4); doi: 10.38007/IJETC.2021.020405.

PZT-based Antiferroelectric Material Based on Building Roof Film Rolling Process and Preparation Method Thereof


Asina Ullahe

Corresponding Author:
Asina Ullahe

University of Balochistan, Pakistan


Antiferroelectric material is a kind of ferroelectric material, which has been widely used in electronic equipment and construction industry. It has always been a research hotspot in the field of material science. In practical applications, the two main factors affecting its energy storage are polarization intensity and breakdown electric field. Due to the large thickness, poor internal consistency and low compression capacity, the energy storage function has not been improved. Therefore, this paper focuses on PZT based antiferroelectric materials based on building roof rolling process. At the same time, the relevant theories and various preparation methods of PZT antiferroelectric materials are introduced in detail. Finally, the solid-state reaction method is used to prepare PZT based antiferroelectric materials. The electrical properties of PZT based antiferroelectric materials were also studied. The experimental results show that the phase transition temperature at 100Hz is close to the theoretical value of 550K, and the test indexes are close to the theoretical value of PZT based antiferroelectric materials.


Film Rolling Process, PZT-Based Antiferroelectric Material, Preparation Method, Building Roof

Cite This Paper

Asina Ullahe. PZT-based Antiferroelectric Material Based on Building Roof Film Rolling Process and Preparation Method Thereof. International Journal of Engineering Technology and Construction (2021), Vol. 2, Issue 4: 50-67. https://doi.org/10.38007/IJETC.2021.020405.


[1] Kuo F U ,  Zang Y ,  Gao Z , et al. Non-linear Dynamics of Inlet Film Thickness during Unsteady Rolling Process. Chinese Journal of Mechanical Engineering, 2016, 29(03):522-530. https://doi.org/10.3901/CJME.2016.0118.010

[2] Liu Y ,  Yang T ,  Wang H . Effect of La doping on structure and dielectric properties of PLZST antiferroelectric ceramics. Journal of Materials Science Materials in Electronics, 2020, 31(2):1-6. https://doi.org/10.1007/s10854-019-02666-2

[3] Shkuratov S I ,  Baird J ,  Antipov A G , et al. Stress-induced depolarization of single-layer PZT 95/5 ferroelectric films. Applied Physics Letters, 2019, 114(17):172902.1-172902.5. https://doi.org/10.1063/1.5092632

[4] Shrout T R ,  Zhang S . Lead-free piezoelectric ceramics: Alternatives for PZT?. Journal of Electroceramics, 2020, 19(1):1-1. https://doi.org/10.1007/s10832-007-9095-5

[5] Schiemer J A ,  Lascu I ,  Harrison R J , et al. Elastic and anelastic relaxation behaviour of perovskite multiferroics I: PbZr0.53Ti0.47O3 (PZT)–PbFe0.5Nb0.5O3 (PFN). Journal of Materials Science, 2016, 51(24):285-304. https://doi.org/10.1007/s10853-016-0280-2 

[6] Hu Y ,  Yao H ,  Yu Z , et al. Preparation of Pb(Zr0.95Ti0.05)O3 Nano-powder and Its Structural Stability of Perovskite. Rare Metal Materials and Engineering, 2016, 45(3):571-574.

[7] Huang F ,  Deng F ,  Li K C , et al. Development of special lubricant for the copper belt cold rolling. Industrial Lubrication & Tribology, 2016, 68(5):586-590. https://doi.org/10.1108/ILT-09-2015-0126

[8] Li X J ,  Cui Y Y ,  Liu Y X , et al. Injector distance setting technology in double cold reduction based on formation mechanism of oil film. Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 2018, 25(2):290-294.

[9] Qian C ,  Bai Z ,  Zhang J , et al. Formation Mechanism and Influence Factors of Roll Surface Oil Film Thickness in the Double Cold Reduction Mill. Mathematical Problems in Engineering, 2020, 2020(1):1-10. https://doi.org/10.1155/2020/6746828

[10] Huang L ,  Guo D ,  Liu X , et al. Effects of nano thickener deposited film on the behaviour of starvation and replenishment of lubricating greases. Friction, 2016, 4(4):313-323.

[11] Wu J Q ,  Liang X P ,  Pan F S . Parametric analysis of mixed lubrication characteristics in work zone of strip rolling. Journal of Central South University, 2016, 23(12):3153-3159.

[12] Yu L ,  Zhao S ,  Wu Q , et al. Free-standing Sandwich Structure MoO 3 -rGO Composite Film Electrode for Flexible Supercapacitors. MRS Advances, 2019, 4(41-42):1-7. https://doi.org/10.1557/adv.2019.266

[13] Zhao B ,  Wan Z ,  Y  Liu, et al. High-order superlattices by rolling up van der Waals heterostructures. Nature, 2021, 591(7850):385-390. https://doi.org/10.1038/s41586-021-03338-0

[14] Liu H H ,  Liu-Nie Y Z ,  Hao Y F , et al. Influence of Mineral Particle Size on Mixing Time and Phase Mixing Technology. Zhongguo Gonglu Xuebao/China Journal of Highway and Transport, 2017, 30(10):151-158.

[15] Nabizadeh H ,  Naderi B ,  Tabatabaee N . Effects of moisture on warm mix asphalt containing Sasobit. Scientia Iranica, 2017, 24(4):1866-1873. https://doi.org/10.24200/sci.2017.4277

[16] Kim B S ,  Jeong H J ,  Han K L , et al. Soft Recovery Process of Mechanically Degraded Flexible a-IGZO TFTs With Various Rolling Stresses and Defect Simulation Using TCAD Simulation. IEEE Transactions on Electron Devices, 2020, PP(99):1-7.

[17] F, Corder, F, et al. Elastic aging from coexistence and transformations of ferroelectric and antiferroelectric states in PZT. Journal of Applied Physics, 2016, 120(6):064104-1-064104-7. https://doi.org/10.1063/1.4960702

[18] MD Nguyen. Impact of fatigue behavior on energy storage performance in dielectric thin-film capacitors. Journal of the European Ceramic Society, 2020, 40(5):1886-1895.

[19] Rennie A ,  King V ,  Hanu-Cernat L M . New technique for securing full thickness skin grafts to difficult sites on the face using silicone impressions. British Journal of Oral & Maxillofacial Surgery, 2016, 54(1):113-114.

[20] Jiang Z X ,  Wang Y G ,  Nie H C , et al. Influence of porosity on nonlinear mechanical properties of unpoled porous Pb(Zr0.95Ti0.05)O-3 ceramics under uniaxial compression. Mechanics of Materials, 2016, 104(jan.):139-144.

[21] Jiang Z ,  Shen H ,  Xin M , et al. Mechanical properties and depoling of porous poled PZT95/5 ferroelectric ceramics under uniaxial compression. Chinese Journal of Solid Mechanics, 2016, 37(1):50-58.

[22] Li G ,  Tian F ,  Gao X , et al. Investigation of High Power Properties of PIN-PMN-PT Relaxor-based Ferroelectric Single Crystals and PZT-4 Piezoelectric Ceramics. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2020, PP(99):1-1.

[23] Duan Z ,  Jiang K ,  Hu Z , et al. Dielectric functions and phase transitions of MgO modified Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 ceramics revealed by spectroscopic ellipsometry. Materials Letters, 2019, 244(JUN.1):18-21.

[24] Guo F Q ,  Zhang B H ,  Fan Z X , et al. Grain size effects on piezoelectric properties of BaTiO3 ceramics prepared by spark plasma sintering. Journal of Materials Science Materials in Electronics, 2016, 27(6):5967-5971. https://doi.org/10.1007/s10854-016-4518-1

[25] Krystyna Guzińska,  Kamierczak D ,  Dymel M , et al. Anti-bacterial materials based on hyaluronic acid: Selection of research methodology and analysis of their anti-bacterial properties. Materials Science and Engineering C, 2018, 93(DEC.):800-808.

[26] Sorgato M J ,  Schneider K ,  Ruther R . Technical and economic evaluation of thin-film CdTe building-integrated photovoltaics (BIPV) replacing faade and rooftop materials in office buildings in a warm and sunny climate. Renewable Energy, 2018, 118(APR.):84-98.

[27] Dakwale V A ,  Ralegaonkar R V . Development of thermally insulated sustainable building model. Proceedings of the Institution of Civil Engineers, 2016, 169(es4):138-149. https://doi.org/10.1680/ensu.14.00041

[28] Zhu B ,  Xu J ,  Li Y , et al. Micro-particle manipulation by single beam acoustic tweezers based on hydrothermal PZT thick film. Aip Advances, 2016, 6(3):452-454. https://doi.org/10.1063/1.4943492

[29] Ralib A ,  Zulfakher N ,  Rahim R A , et al. Finite Element Simulation Of Mems Piezoelectric Energy Scavenger Based On Pzt Thin Film. Iium Engineering Journal, 2019, 20(1):90-99. https://doi.org/10.31436/iiumej.v20i1.991