In recent years, due to the continuous development of industry, there is an increasing demand for special materials. Especially in the petroleum, chemical, machinery and other industries, higher requirements for materials with comprehensive new properties have been put forward. In addition to meeting the strength, toughness, shaping, and impact properties of the material, it must also meet the conditions of wear and corrosion resistance of steel materials in special environments. Among them, arc spraying technology is an important branch of thermal spraying technology in the emerging surface engineering discipline, and it has excellent temperature regulation performance when used in a simulated green building environment. The purpose of this paper is to study the temperature regulation performance of the arc sprayed nano-closed composite coating in a simulated green building environment. In this paper, arc spraying nano-material concentrates and nano-coatings are prepared, and nano-modified epoxy sealing coatings for sealing of metal coatings in arc-spraying are developed. In this paper, the thermoregulation performance of spray coatings is studied by simulating a green building environment. Experimental results show that the coating can still maintain the room temperature at about 16 degrees when the outdoor temperature exceeds 30 degrees celsius. It can be seen that the use of the spray-coated insulation board is beneficial to reduce the difference in indoor temperature at the same time, is beneficial to the uniform distribution of indoor temperature, and can effectively slow down the fluctuation of indoor temperature.

Depak Kumar Jaine. Temperature Regulation Performance of Arc Sprayed Nano-Sealed Composite Coating in a Simulated Green Building Environment. International Journal of Engineering Technology and Construction (2022), Vol. 3, Issue 3: 1-19. https://doi.org/10.38007/IJETC.2022.030301.

[1] Smovzh D V , Sakhapov S Z , Zaikovskii A V , et al. Formation mechanism of MgO hollow nanospheres via calcination of C-MgO composite produced by electric arc spraying. Ceramics International, 2019, 45(6):7338-7343.

[2] Tamaki R , Yamakawa M . Effect of plate mounted between two wires in electric arc spraying. Journal of computational science, 2019, 32(MAR.):56-67. https://doi.org/10.1016/j.jocs.2019.02.006

[3] R, H, Singleton, et al. Tungsten Fabrication by Arc Spraying. JOM, 2017, 13(7):483-486. https://doi.org/10.1007/BF03378087

[4] Bobzin K ,et al. Modeling Plasma–Particle Interaction in Multi-Arc Plasma Spraying. Journal of Thermal Spray Technology, 2017, 26(3):1-13. https://doi.org/10.1007/s11666-016-0514-5

[5] Kuznetsov Y A , Markov M A , Krasikov A V , et al. Formation of Wear- and Corrosion-Resistant Ceramic Coatings by Combined Technologies of Spraying and Micro-Arc Oxidation. Russian Journal of Applied Chemistry, 2019, 92(7):875-882.

[6] Bobzin K , Te M , Schein J , et al. Numerical Study on Plasma Jet and Particle Behavior in Multi-arc Plasma Spraying. Journal of Thermal Spray Technology, 2017, 26(5):811-830. https://doi.org/10.1007/s11666-017-0564-3

[7] Gusev V M , Elagina O Y , Nesterenko N S , et al. The Effect of the Design of the Nozzle System of Electric Arc Metallizing Devices on the Conditions of Spraying Wire Materials. Journal of Machinery Manufacture and Reliability, 2021, 50(3):185-190. https://doi.org/10.3103/S1052618821030055

[8] Arif Z , Shah M , EU Rehman, et al. Effect of spraying parameters on surface roughness, deposition efficiency, and microstructure of electric arc sprayed brass coating. International Journal of ADVANCED AND APPLIED SCIENCES, 2020, 7(7):25-39. https://doi.org/10.21833/ijaas.2020.07.004

[9] Nigam S , Mahapatra S S , Patel S K . Study of Various Aspects of Copper Coating on ABS Plastic by Electric Arc Spraying. Materials today: proceedings, 2018, 5(2):8446-8453. https://doi.org/10.1016/j.matpr.2017.11.540

[10] V. О. Royanov, Zakharova I  . Applications of electric arc metallization method with pulsating air-spraying flow for application of coatings made from a cored wire. Reporter of the Priazovskyi State Technical University Section Technical sciences, 2020(40):44-50.

[11] Phanden R K , Sindhwani R , Kalsariya V , et al. Selection of material for electric arc spraying by using hierarchical entropy-TOPSIS approach. International Journal of Productivity and Quality Management, 2019, 26(3):276. https://doi.org/10.1504/IJPQM.2019.098364

[12] Santos L , Flores-Sahagun T S , Paredes R , et al. Study on the deposition of stainless steel on polymeric substrates by arc electric thermal spraying. Materials Research Express, 2019, 6(10):105314-. https://doi.org/10.1088/2053-1591/ab2a2f

[13] Zeng, Yong, Chen, et al. Spraying Trajectory Planning For Outer-Horn Surface With Two Patches Based On Continuous Varied Dip-Angle. International Journal of Robotics & Automation, 2018, 33(4):346-354.

[14] Pang X , Wang R , Wei Q , et al. Effect of epoxy resin sealing on corrosion resistance of arc spraying aluminium coating using cathode electrophoresis method. Materials Research Express, 2017, 5(1):016527. https://doi.org/10.1088/2053-1591/aaa055

[15] Zhe W , Du L , Hao L , et al. Preparation and characterization of YSZ abradable sealing coating through mixed solution precursor plasma spraying. Ceramics International, 2019, 45( 9):11802-11811.

[16] Wang Z , Du L Z , H Lan, et al. A novel technology of Sol precursor plasma spraying to obtain the ceramic matrix abradable sealing coating. Materials Letters, 2019, 253(Oct.15):226-229. https://doi.org/10.1016/j.matlet.2019.05.079

[17] Ardalan R B , Jamshidi N , Arabameri H , et al. Enhancing the permeability and abrasion resistance of concrete using colloidal nano-SiO 2 oxide and spraying nanosilicon practices. Construction & Building Materials, 2017, 146(Aug.15):128-135.

[18] Dobrozhan O , Vorobiov S , Kurbatov D , et al. Structural properties and chemical composition of ZnO films deposited onto flexible substrates by spraying polyol mediated nanoinks. Superlattices and microstructures, 2020, 140(Apr.):106455.1-106455.10. https://doi.org/10.1016/j.spmi.2020.106455

[19] Guo K , Hu A , Wang K , et al. Effects of spraying nano-materials on the absorption of metal(loid)s in cucumber. Nanobiotechnology, IET, 2019, 13(7):712-719. https://doi.org/10.1049/iet-nbt.2019.0060

[20] Noaema A H , Leiby H R , Alhasany A R . Effect of Spraying Nano Fertilizers of Potassium and Boron on Growth and Yield of Wheat (Triticum aestivum L.). IOP Conference Series: Materials Science and, Engineering, 2020, 871(1):012012 (9pp).

[21] Wain-Martin A , Moran-Ruiz A , Laguna-Bercero M A , et al. SOFC cathodic layers using wet powder spraying technique with self synthesized nanopowders. International journal of hydrogen energy, 2019, 44(14):7555-7563. https://doi.org/10.1016/j.ijhydene.2019.01.220

[22] An Y , Li S , Hou G , et al. Mechanical and tribological properties of nano/micro composite alumina coatings fabricated by atmospheric plasma spraying. Ceramics International, 2017, 43(6):5319-5328. https://doi.org/10.1016/j.ceramint.2017.01.072

[23] Chen X , Zhang B , Gong Y , et al. Mechanical properties of nanodiamond-reinforced hydroxyapatite composite coatings deposited by suspension plasma spraying. Applied Surface Science, 2018, 439(MAY1):60-65. https://doi.org/10.1016/j.apsusc.2018.01.014

[24] Potekaev A I , Lysak I A , Malinovskaya T D , et al. Coatings Based on Nanodispersed Oxide Materials Produced by the Method of Pneumatic Spraying. Russian Physics Journal, 2018, 60(11):2047-2049. https://doi.org/10.1007/s11182-018-1324-7