With the rapid development of China's economy, there are more and more distributed computing systems, which are also widely used in actual production. The main research direction of this paper is the distributed computing collaborative CAD system based on COM / NASD system. The software is based on COM / DCOM, and studies the system through collaborative design, simulation and testing. In this process, we first need to build the model. Then, according to the actual situation, the corresponding algorithm program is established to simulate the running environment of the whole module and set the parameter variables. Secondly, the components are assembled and connected with the system according to the requirements. Finally, the system is tested as a whole. The test results show that the system has high data processing efficiency, fast system response time and low delay, which indicates that the system has good comprehensive performance.

Pushppita Ijazan. Distributed Computing Collaborative CAD System Based on COM / DCOM. Distributed Processing System (2022), Vol. 3, Issue 1: 46-53. https://doi.org/10.38007/DPS.2022.030106.

[1] Dusit Niyato, Kaibin Huang, Mehdi Bennis, Miao Pan, Zehui Xiong, Long Bao Le, Dong In Kim, Li-Chun Wang:IEEE TCCN Special Section Editorial: Convergence of Collaborative Distributed Machine Learning and Edge Computing Toward Intelligent Networking. IEEE Trans. Cogn. Commun. Netw. 7(4): 1016-1020 (2021).

[2] Yuvraj Sahni, Jiannong Cao, Lei Yang, Yusheng Ji:Multi-Hop Multi-Task Partial Computation Offloading in Collaborative Edge Computing. IEEE Trans. Parallel Distributed Syst. 32(5): 1133-1145 (2021). https://doi.org/10.1109/TPDS.2020.3042224

[3] Ankur Gupta, Rahul Kumar, Harkirat Singh Arora, Balasubramanian Raman:C-CADZ: computational intelligence system for coronary artery disease detection using Z-Alizadeh Sani dataset. Appl. Intell. 52(3): 2436-2464 (2022).

[4] Agostino Giorgio, Cataldo Guaragnella, Maria Rizzi:An Effective CAD System for Heart Sound Abnormality Detection. Circuits Syst. Signal Process. 41(5): 2845-2870 (2022).

[5] R. Manickavasagam, S. Selvan, Mary Selvan:CAD system for lung nodule detection using deep learning with CNN. Medical Biol. Eng. Comput. 60(1): 221-228 (2022).

[6] Nada M. Hassan, Safwat Hamad, Khaled Mahar:Mammogram breast cancer CAD systems for mass detection and classification: a review. Multim. Tools Appl. 81(14): 20043-20075 (2022).

[7] Durga Prasad Mannepalli, Varsha Namdeo:A cad system design based on HybridMultiscale convolutional Mantaray network for pneumonia diagnosis. Multim. Tools Appl. 81(9): 12857-12881 (2022).

[8] Ardhendu Sekhar, Soumen Biswas, Ranjay Hazra, Arun Kumar Sunaniya, Amrit Mukherjee, Lixia Yang:Brain Tumor Classification Using Fine-Tuned GoogLeNet Features and Machine Learning Algorithms: IoMT Enabled CAD System. IEEE J. Biomed. Health Informatics 26(3): 983-991 (2022). https://doi.org/10.1109/JBHI.2021.3100758

[9] Shahriar Sefati, Rachel Hegeman, Iulian Iordachita, Russell H. Taylor, Mehran Armand:A Dexterous Robotic System for Autonomous Debridement of Osteolytic Bone Lesions in Confined Spaces: Human Cadaver Studies. IEEE Trans. Robotics 38(2): 1213-1229 (2022). https://doi.org/10.1109/TRO.2021.3091283

[10] Tatiana A. Makarovskikh, Anatoly V. Panyukov:Software for the Problem of Constructing Cutting Tool Paths in CAD/CAM Systems for Technological Preparation of Cutting Processes. Autom. Remote. Control. 82(3): 468-480 (2021). https://doi.org/10.1134/S0005117921030073

[11] Robert Enríquez-Reyes, Susana Cadena-Vela, Andrés Fuster Guilló, Jose-Norberto Mazón, Luis-Daniel Ibáñez, Elena Simperl:Systematic Mapping of Open Data Studies: Classification and Trends From a Technological Perspective. IEEE Access 9: 12968-12988 (2021).

[12] Sandun Jayarathna, Md Foiez Ahmed, Liam O'ryan, Hem Moktan, Yonggang Cui, Sang Hyun Cho:Characterization of a Pixelated Cadmium Telluride Detector System Using a Polychromatic X-Ray Source and Gold Nanoparticle-Loaded Phantoms for Benchtop X-Ray Fluorescence Imaging. IEEE Access 9: 49912-49919 (2021).

[13] Leticia Zamora-Cadenas, Igone Vélez, Jesús Enrique Sierra-García:UWB-Based Safety System for Autonomous Guided Vehicles Without Hardware on the Infrastructure. IEEE Access 9: 96430-96443 (2021).

[14] Geoff Sutcliffe, Martin Desharnais:The CADE-28 Automated Theorem Proving System Competition - CASC-28. AI Commun. 34(4): 259-276 (2021). https://doi.org/10.3233/AIC-210235

[15] Isamu Nishida, Keiichi Shirase:Automated Process Planning System for End-Milling Operation by CAD Model in STL Format. Int. J. Autom. Technol. 15(2): 149-157 (2021).

[16] Syrine Neffati, Khaoula Ben Abdellafou, Ahamed Aljuhani, Okba Taouali:An enhanced CAD system based on machine Learning Algorithm for brain MRI classification. J. Intell. Fuzzy Syst. 41(1): 1845-1854 (2021). https://doi.org/10.3233/JIFS-210595

[17] Zhana Fidakar Mohammed, Alan Anwer Abdulla:An efficient CAD system for ALL cell identification from microscopic blood images. Multim. Tools Appl. 80(4): 6355-6368 (2021).

[18] Pemmu Raghavaiah, S. Varadarajan:A CAD system design to diagnosize alzheimers disease from MRI brain images using optimal deep neural network. Multim. Tools Appl. 80(17): 26411-26428 (2021). https://doi.org/10.1007/s11042-021-10928-7