With the development of the Internet, computer technology is developing rapidly. The virtual reality system of machining can realize the software of hardware equipment, and trainees can complete the experiment through virtual simulation software, which effectively overcomes the limitations of traditional experimental teaching, and at the same time can provide a quick introduction to machining technology under the premise of ensuring safety. Therefore, this paper focuses on the 3D virtual reality system and augmented reality assisted system for machine processing and conducts an in-depth study. The paper provides a brief analysis of the application of 3D technology in the engineering machining industry from three perspectives: the basic overview of machine machining, machining systems and machining analysis.

Yang Li. 3D Technology in the Construction Machinery Processing Industry. Kinetic Mechanical Engineering (2022), Vol. 3, Issue 4: 1-8. https://doi.org/10.38007/KME.2022.030401.

[1] Naoki, TAKANO, Hideo, et al. Study on Compressive Property of Aluminum Alloy Lattice Structure Additively Manufactured by 3D Printing Technology. Journal of the Society of Materials Science, Japan, 2019, 68(4):351-357. https://doi.org/10.2472/jsms.68.351

[2] Weiss H , Hernandez Y , Kim K H , et al. 3D virtual fit assessment and modeling: liquid cooling and ventilation garment. International Journal of Clothing Science and Technology, 2022, 34(3):301-314. https://doi.org/10.1108/IJCST-09-2020-0143

[3] Wilson A . Swiss Textile Machinery Companies Look to Growth in Carbon and Glass Fiber Composites. International Fiber Journal, 2019, 33(3):32-35.

[4] Sadrnia A , Langarudi N R , Sani A P . Sustainable closed-loop supply chain network optimization for construction machinery recovering. Journal of Industrial, Management Optimization, 2021, 17(5):2389-2414. https://doi.org/10.3934/jimo.2020074

[5] Maddamasetty A , Bodduru K , Bevara S , et al. Performance evaluation of graphene added nanofluids and self-lubricating tools in machining Inconel 718. World Journal of Engineering, 2022, 19(4):583-593. https://doi.org/10.1108/WJE-02-2021-0074

[6] Raj A , Misra J P , Khanduja D . Modeling of Wire Electro-Spark Machining of Inconel 690 Superalloy Using Support Vector Machine and Random Forest Regression Approaches. Journal of Advanced Manufacturing Systems, 2022, 21(03):557-571. https://doi.org/10.1142/S0219686722500196

[7] Singh P , Singh L . Examination and Optimization of Machining Parameters in Electrical Discharge Machining of UNS T30407 Steel. Journal of Advanced Manufacturing Systems, 2022, 21(03):573-589. https://doi.org/10.1142/S0219686722500202

[8] David M. Liebovitz MD is Associate Professor of Medicine, Division of General Internal Medicine and Geriatics, Feinberg School of Medicine, Northwestern University, Chicago. Please address correspondence to David M. Liebovitz. Machining a New Layer of Drug Safety - ScienceDirect. The Joint Commission Journal on Quality and Patient Safety, 2020, 46( 1):1-2. https://doi.org/10.1016/j.jcjq.2019.11.001

[9] Koichiro, YAMADA, Kaoru, et al. Mechanical Design and Drawing Education. Journal Of Japan Society For Design Engineering, 2019, 54(11):769-780.

[10] Gajrani K K , Bambam A K , Dhanola A . Machining of titanium alloys using phosphonium-based halogen-free ionic liquid as lubricant additives. Industrial Lubrication and Tribology, 2022, 74(6):722-728. https://doi.org/10.1108/ILT-03-2022-0083

[11] Kumar A . Project Department: Moving Ahead with Focus. Indian Railways, 2019, 62(11):74-75.

[12] Lehtineva L , Agbejule A . The relationship between traditional project management, agile project management and teamwork quality on project success. International Journal of Organizational Analysis, 2022, 30(7):124-136. https://doi.org/10.1108/IJOA-02-2022-3149

[13] Ahmady A A , Enizy S A , Alali H , et al. Implementation of a sedation protocol: a quality improvement project to enhance sedation management in the paediatric intensive care unit. BMJ Open Quality, 2022, 11(1):918-25. https://doi.org/10.1136/bmjoq-2021-001501

[14] Chandra R , Subbarao P M V , Vijay V . Biomass as a means of achieving rural energy self-sufficiency: a concept. Built Environment Project and Asset Management, 2022, 12(3):382-400. https://doi.org/10.1108/BEPAM-01-2021-0012

[15] Pan G , Chen W , Wang H . Inverse kinematics solution and posture optimization of a new redundant hybrid automatic fastening system for aircraft assembly. Industrial Robot: the international journal of robotics research and application, 2020, 47(1):57-67. https://doi.org/10.1108/IR-06-2019-0129

[16] Sammut-Powell C , Birleson E , Boaden R , et al. Scale-up of ABC care bundle for intracerebral haemorrhage across two hyperacute stroke units in one region in England: a mixed methods evaluation of a quality improvement project. BMJ Open Quality, 2022, 11(2):117-71. https://doi.org/10.1136/bmjoq-2021-001601

[17] Chatterjee S , Chaudhuri R , Vrontis D . Knowledge sharing in international markets for product and process innovation: moderating role of firm's absorptive capacity. International Marketing Review, 2022, 39(3):706-733. https://doi.org/10.1108/IMR-11-2020-0261

[18] Mahdiraji H A , Beheshti M , Boudlaie H , et al. A process-based guide for international entrepreneurs while? Investing in the agrifood?sector of?an emerging economy: a?multi-layer decision-making approach. British Food Journal, 2022, 124(7):1984-2011. https://doi.org/10.1108/BFJ-08-2021-0876